Product Warranty

Polyester Product Warranty

Warranty Coverage

Higgins Insulation Pty Ltd warrants that its polyester insulation products will remain free from manufacturing defects. Performance guarantees are strictly defined by product category:

  • Thermal Insulation: Products bearing a stated R-value on the physical packaging will perform in accordance with the thermal resistance requirements of AS/NZS 4859.1.
  • Acoustic Insulation: Products supplied specifically for acoustic treatment are warranted exclusively to meet the mass and physical dimensions stated on the customer invoice, subject to the allowable tolerance levels specified in Table 6.2.3 of AS/NZS 4859.1 (2024 Amendment).
  • Fire Hazard Properties: All applicable products will comply with the simultaneous determination of ignitability, flame propagation, heat release, and smoke release as set out in AS 1530.3.

Warranty Period

Residential Applications (Class 1 Buildings): Valid for 50 years (the recognised lifetime of the building) from the date of original installation.

Commercial Applications (Class 2 to 10 Buildings): Valid for 10 years from the date of original installation.

Conditions of Warranty

This warranty is validated subject to the following conditions being met in full:

  • Thermal products manufactured to AS/NZS 4859.1 must be installed in accordance with AS 3999:2015 and all other products must be installed in accordance with the installation guidelines set out in the ICANZ Part 2 Insulation Installation Handbook v8.0.
  • The installation must occur within an NCC (National Construction Code) or QDC (Queensland Development Code) compliant building.
  • The warranty must be registered within 30 days of purchase using the official Higgins Insulation warranty registration process.
  • The products must be kept dry and stored in their original packaging prior to installation.

Warranty Exclusions

Higgins Insulation accepts no liability for product defects or failures caused or contributed to by:

  • Improper handling, storage, or installation contrary to the published guidelines.
  • Force majeure events including fire, flood, severe weather, or seismic activity.
  • Exposure to corrosive in situ conditions, including acidic or alkaline environments, or continuous exposure to harsh chemicals.
  • Biological growth including mould, mildew, or other fungi resulting from the environmental conditions of the building.

Claims Procedure

Any claim under this warranty must be lodged in writing to warranty@higginsinsulation.com.au within 30 days of the defect being discovered. The claimant must provide the invoice number, product codes, batch numbers, and photographic evidence of the alleged defect.

Higgins Insulation strictly reserves the right to inspect the product in situ. Any removal, alteration, or interference with the installed product prior to a formal inspection by Higgins Insulation will immediately void this warranty.

Limitation of Liability (Trade and Commercial Purchasers)

For goods not ordinarily acquired for personal, domestic, or household use, the liability of Higgins Insulation is strictly limited to the replacement of the defective goods, the repair of the goods, or the payment of the cost of replacing the goods. Higgins Insulation expressly excludes all liability for any indirect, incidental, or consequential loss, including but not limited to project delays, loss of profits, or loss of business opportunity.

Statutory Rights (Consumers)

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.