1300 130 233

Nuwrap 5 Acoustic Pipe Lagging Insulation

$209.50

Nuwrap 5 Acoustic Pipe Insulation 3000 X 1350mm 4.05m2 – effective, easy-to-install pipe lagging solution to meet BCA requirements & quieten noisy pipes

Dimensions: 3000mm x 1350mm
m2 per pack: 4.05m2

Get Trade PriceEnquiry

Description

NuWrap 5 is an effective, easy-to-install sound lagging solution for noisy pipes. Designed to meet the latest Australian building codes, NuWrap 5 Acoustic Pipe Lagging combines high performance acoustic convoluted open cell foam laminated to NuWave 4-Zero acoustic barrier to create a flexible pipe lagging solution.

 

Pipe Insulation is becoming ever more important in modern residential and commercial construction as we search for more privacy and quieter living spaces. Thermotec NuWrap 5? Thermotec Nuwrap 5 Pipe Insulation is an effective, easy-to-install acoustic pipe lagging solution for noisy pipes.

Designed to meet the latest Australian building codes, NuWrap 5? Pipe insulation combines high performance, acoustic, convoluted open cell foam laminated to NuWave 4-Zero acoustic barrier to create a flexible, high performance pipe lagging solution that is easy to cut and install.

Nuwrap-5 pipe insulation has low VOC and EDP-EM19 credentials in that there are zero ozone depleting substances in the materials composition or employed during the manufacturing process,  and is Green Star compliant.

Also suitable for ducting and ventilation fans, it is supplied with 4-Zero foil facing as standard. Designed to meet the latest building codes, NuWrap 5™ is available in rolls and as pre-cut ‘flat packs’ for quick and easy installation.

Thermotec Insulation Building Code of Australia (BCA) Compliance:

Nuwrap 5 Acoustic Pipe Insulation complies with BCA requirements.
Recent acoustic testing also confirms that NuWrap 5 continues to be compliant to the BCA requirements for habitable areas. Volume 1, section F5.6, for sole occupancy units, states that the duct or waste pipe must be separated from the rooms of any sole-occupancy unit by construction with an Rw+Ctr (airborne) not less than 40 if the adjacent room is a habitable room.

NuWrap 5 exceeds this requirement with just one wrap around the pipe and a 10mm plasterboard ceiling. You won’t require additional fibre batt in the ceiling.

Thermotec NuWrap 5 meets the requirements of all States and Territories. They ensure it is in the manufacturers’ recommendations. There is no need for further regulatory body approval or certification.

Thermotec made NuWrap 5 in Australia, specified and used throughout Australia.

Thermotec Nuwrap 5 Pipe Lagging Insulation Product Dimensions:

1.35mtr x 3mtr Roll. 5mtr Roll length also available upon request.

We also supply NuWrap 5 Pipe Insulation as Precut ‘Flat Pack’ Product upon request.

Suit pipe diameters from 40mm to 225mm also available to suit most PVC fittings.

Additional information

Dimensions

1350mm x 3m

Width

1350mm

m2

4.05

Downloads

Brochure

Close Menu